
Add to Cart
0. 2 m2 Heat ExchangeR HTA Distillation Machine for CBD / THC / Hemp oil
—— Operation
Feed liquid is admitted into still under high vacuum, immediately spread into a very thin film and forced quickly down the evaporation surface. Heated walls and high vacuum drive the more volatile components (distillate) to the external condenser as the less volatile components (residue) continue down the cylinder. The resulting fractions, thus separated, exit through individual discharge outlets. Depending on application, the desired product is either the distillate or the residue fraction. Small amounts of condensable low MW compounds collect in cold trap upstream of vacuum system. For high solvent loads, an optional external condenser may be installed immediately downstream of the still.
TYPE | BML-20 |
MATERIAL | stainless steel 304 |
TEMPERATURE | Room temp~ 200/300 ℃(depend on the Electric heater ) |
DIAMETER | 200 (mm) |
HEAT EXCHANGER HTA | 0.2(m2) |
FEED AMOUNT | 8~24( l/h) |
ROTATION SPEED | 40-250rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0. 1mbar(depend on the nature of material and vacuum pump)(vacuum pump not included) |
FLOOR AREA | length*width*height=1200*800*2500 (mm) |
POWER | 1KW (without pump |
VOLTAGE | 220V/60hz |
The Wiped Film Evaporator is specifically recognized and accepted solution for difficult and challenging processes in the range of distillation, concentration, degassing, drying and reactions. Our evaporators are developed keeping all the international standards and parameters in check by using optimum grade materials to enhance its productivity.