
Add to Cart
2000 - 6000 ml / h Solvent Recovery Machine for CBD / THC / Hemp oil
—— Design
Wiped Film Evaporators are horizontal evaporator with wiper basket, gear motors and external condenser.
The vapour nozzle is typically arranged at the upper end of the evaporator in order to facilitate the transfer of the vapours to the external condenser.
Dea offers thin film evaporators from 0.058 to 3 m2 .
TYPE | BML-5 |
MATERIAL | stainless steel 304 |
TEMPERATURE | Room temp~200/300 ℃(depend on the oil heater) |
DIAMETER | 80 (mm) |
HEAT EXCHANGER HTA | 0.058 (m2) |
FEED AMOUNT | 2000~6000 ( ml/h) |
ROTATION SPEED | 80-390rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0. 5-50mbar(depend on the nature of material and vacuum pump) |
FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
POWER | 2KW (without pump) |
VOLTAGE | 220V -60hz |
Solvents, which are used for the cleaning of spray guns & tools, are very expensive. These solvents can be effectively recycled to reduce the production costs and avoid major disposal costs.
The recycling units make it possible to restore & reuse the solvents for an almost endless number of times, for the cleaning application. By means of a simple distillation process the original nature of the used solvents is restored by separating from the polluting substances such as paints, resins, inks, oils, greases, etc. The regenerated solvents are then collected outside the unit and forwarded to their next application. The polluting substances remain, as distillation residues, in a heat resistant plastic bag and depending on their composition, will be sent as inert materials, in maximum concentration condition, to special companies for further treatments.