
Add to Cart
300 mm Diameter Thin Film Evaporator for CBD / THC / Hemp oil / Cannabissativa
—— Design
Wiped Film Evaporators are horizontal evaporator with wiper basket, gear motors and external condenser.
The vapour nozzle is typically arranged at the upper end of the evaporator in order to facilitate the transfer of the vapours to the external condenser.
Dea offers thin film evaporators from 0.058 to 3 m2 .
TYPE | BML-100 |
MATERIAL | stainless steel 304/S316L |
TEMPERATURE | Room temp~ 150/250 ℃(depend on the Electric heater ) |
DIAMETER | 300 (mm) |
HEAT EXCHANGER HTA | 1.0(m2) |
FEED AMOUNT | 40~120( l/h) |
ROTATION SPEED | 40-250rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0.5mbar(depend on the nature of material and vacuum pump)(vacuum pump not included) |
FLOOR AREA | length*width*height=1200*1000*3500 (mm) |
POWER | 1KW (without pump) |
VOLTAGE | 400V/60hz |
The rotating wiper equally distributes the down flowing liquid feed on the inner side of the wall. The film is about 0,1 to 0,5mm thick depending on the viscosity of the liquid, type of wiper system, rotating speed and liquid throughput. This thin film provides almost no hydrostatic pressure, minimum hold-up and almost no temperature and concentration gradient due to the good radial mixing performance. This provides highest evaporation rates means shortest residence time in the evaporator at lowest temperatures permitting the production of high quality temperature sensitive products. The vapors are mostly guided upwards in a counter current manner to a down coming condenser.