
Add to Cart
400 mm Diameter Thin Film Evaporator for CBD / THC / Hemp oil / Cannabissativa
—— Design
Wiped Film Evaporators are horizontal evaporator with wiper basket, gear motors and external condenser.
The vapour nozzle is typically arranged at the upper end of the evaporator in order to facilitate the transfer of the vapours to the external condenser.
Dea offers thin film evaporators from 0.058 to 3 m2 .
TYPE | BML-200 |
MATERIAL | stainless steel 304/S316L |
TEMPERATURE | Room temp~ 150/250 ℃(depend on the Electric heater ) |
DIAMETER | 400 (mm) |
HEAT EXCHANGER HTA | 2.0(m2) |
FEED AMOUNT | 80~240( l/h) |
ROTATION SPEED | 40-250rpm |
FILM SYSTEM | Wiped Filming System |
VACUITY | 0.5mbar(depend on the nature of material and vacuum pump)(vacuum pump not included) |
FLOOR AREA | length*width*height=1500*1000*4700 (mm) |
POWER | 3.2KW (without pump) |
VOLTAGE | 400V/60hz |
The Thin Film Evaporator is used for concentration, distilling, stripping, dehydration and deodorisation of products which are heat sensitive or viscous. The equipment can handle a very wide range of feed compositions ranging from 1% to over 95% concentration. Thin Film Evaporator has several advantages as stated in the table below. The operation is continuous with a single pass; the self cleaning continuous contact wipers produce and renew the thin film. Such an operation improves product yield, avoids residue and colour formation. It has an internal condenser (optional) that minimizes the pressure drop and maintains vacuum.