800 * 800 * 2150 mm Evaporation Machine For CBD / Hemp oil / THC
—— particular
- The reactor can be operated under normal pressure or pressure reduction.
- The device is a stirred reactor with a jacket, and the internals and pipes are made of stainless steel.
- The reactor consists of three parts: mixing device, shaft seal and stirring tank.
- The reaction kettle includes transmission, mixing shaft and agitator. The stirring shaft is driven by the motor and the reducer, so that the agitator is rotated at a certain speed to achieve the purpose of stirring.
- The shaft seal of the reactor is a dynamic seal between the mixing tank and the stirring shaft to seal the liquid in the tank until it is leaked.
- Stirred tanks include tanks, heating devices and accessories, which are used to hold reactive materials and provide heat.
| TYPE |
F-200 |
| MATERIAL |
stainless steel 304/S316L |
| TEMPERATURE |
Room temp~150/250 ℃(depend on the Electric heater) |
| DIAMETER |
600 (mm) |
| VOLUME |
200 (L) |
| ROTATION SPEED |
50-250rpm |
|
STIRRED PADDLE
|
Blade paddle |
| VACUITY |
1.0mbar～3bar(depend on the nature of material and vacuum pump) |
| FLOOR AREA |
length*width*height=800*800*2150(mm)(without pump) |
| POWER |
800W (without pump) |
| VOLTAGE |
220V-60HZ |
