Shanghai Dea Chemical Equipment Co., Ltd.
Shanghai Dea Chemical Equipment Co., Ltd. DEA Service For The World
Add to Cart
3.5KW Continuous Vacuum Distillation Machine Stainless Steel 304
—— Particular features
Continuous distillation process.
Low operating pressures (100~10000Pa ,100Pa=1mbar).
Short residence time.
High evaporation rates.
Processing of high-boiling, high-viscosity or crystallizing products is possible.
Can be used as a reboiler for column.
Low fouling on evaporator wall.
| TYPE | BML-10 |
| MATERIAL | stainless steel 304 |
| TEMPERATURE | Room temp~200/300 ℃(depend on the oil heater) |
| DIAMETER | 100 (mm) |
| HEAT EXCHANGER HTA | 0.12 (m2) |
| FEED AMOUNT | 4000~12000 ( ml/h) |
| ROTATION SPEED | 80-390rpm |
| FILM SYSTEM | Wiped Filming System |
| VACUITY | 0. 5-50mbar(depend on the nature of material and vacuum pump) |
| FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
| POWER | 3.5KW (without pump) |
| VOLTAGE | 220V -60hz |
Vacuum Distillation Machine has several advantages as stated in the table below. The operation is continuous with a single pass; the self cleaning continuous contact wipers produce and renew the thin film. Such an operation improves product yield, avoids residue and colour formation. It has an internal condenser (optional) that minimizes the pressure drop and maintains vacuum.
The high boiling component flows along the shell wall and is discharged from the product outlet. Wiper action is important in promoting downward flow. The product/concentrate should be in fluid form at the operating temperature. Different designs of rotors are available depending upon the product, its viscosity and the process pressure.