Shanghai Dea Chemical Equipment Co., Ltd.
Shanghai Dea Chemical Equipment Co., Ltd. DEA Service For The World
Add to Cart
Continuous Reactor Short Path Distillation Equipment Laboratory Use
Short Path Distillation Equipment Introduction
Molecular Distillation/Short Path Distillation is a comparatively new separation technology. It can separate liquid-liquid mixture under temperature that is far lower than boiling point by the difference of mean free path of molecules under high vacuum condition.
Short Path Distillation Equipment Parameters
| TYPE | DZL-10 |
| MATERIAL | stainless steel 304 |
| TEMPERATURE | Room temp~200/300 ℃(depend on the Electric heater) |
| DIAMETER | 100 (mm) |
| HEAT EXCHANGER HTA | 0.12 (m2) |
| INNER CONDENSING HTA | 0.2(m2) |
| FEED AMOUNT | 4000~12000 ( ml/h) |
| ROTATION SPEED | 50-250rpm |
| FILM SYSTEM | Wiped Filming System |
| VACUITY | 0.001mbar(depend on the nature of material and vacuum pump) |
| COLD TRAP | Liquid nitrogen |
| FLOOR AREA | length*width*height=1100*500*1750 (mm)(without pump) |
| POWER | 3KW (without pump) |
| VOLTAGE | 220V-60HZ |
Short Path Distillation Equipment has a thermal separation technique operating at a process pressures in the range of 1 to 0,001 mbar.
It lowers the boiling temperature and is an excellent method for gentle thermal treatment of heat sensitive, high boiling products.
The Short Path Distillation Equipment consists basically, of a cylindrical body with a heating jacket, a rotor and condenser inside.
The vapor passes by the shortest route and with practically no pressure drop to the internal condenser where it is precipitated on the tubes.
The non-volatile portion reaches the lower part of the evaporator and leaves it through the bottom product outlet.
The residual vapor and inert gases flow through the vacuum nozzle to the vacuum system.
On the supporting structure of the rotor mobile precision wiper blades are mounted.
Residence time of a few seconds.
Required distillation achieved in a single pass.
Enhanced vacuum lowers boiling points by 40 to 50 "C.
Excellent for gently processing heat sensitive, high boiling products.
